Our Smart geyser Tag has the capability to make any geyser completely smart in all aspects. You will be able to detects leaks at an early stage which will automatically notify you, your insurance and plumber. Once the geyser detects a leak it will automatically close the flow to your geyser. You are also able to control the thermostat remotely from anywhere with our App and also set time constraints as you wish, which could have a massive saving on your electricity bill.
Main unit: 85mmx55mmx22mm,
Relay unit -TBD.
Actuator: 70mm x 65mm x 60mm.
Power supply: TBD
Packing box size: TBD
Enclosure Materials: ABS plastic.
Radio: GMS, Wi-Fi, BlueTooth, Non-specific short range device (SRD).
Frequency range: Quad-Band (850/900/1800/1900MHz)
GPRS: Multi-slot class 10(4 Down, 2 Up, 5 Total) Max downlink 85.6Kbps, CSI-CS4SSMS coding scheme.
TX power: 850/900MHz class 4 (2W), 1800/1900MHz class 1 (1W)
BlueTooth: ISM Band: 2.402GHz to 2.480GHz
RX Sensitivity: -90 dBm
TX Power: 0 dBm
Antenna: Ceramic chip
Approvals: Fully-certified BLE with integrated Bluetooth 4.2 Low Energy Stack
Frequency Range: 2.4G ~ 2.5G (2400MHz ~ 2483.5MHz)
Protocols: 802.11 b/g/n (HT20)
Network Protocols: IPv4, TCP/UDP/HTTP
Transmission power: 802.11 b: +20 dBm, 802.11 g: +17 dBm, 802.11 n: +14 dBm
Receiver sensitivity: 802.11 b: –91 dbm (11 Mbps), 802.11 g: –75 dbm (54 Mbps),802.11 n: –72 dbm (MCS7)
Antenna: PCB Trace
Certification: Wi-Fi Alliance
Radio: Non-specific short range device (SRD)
Non-specific short range device (SRD): Carrier Frequency: 868.1MHz
Relative Standards: EN 300 220-1, EN 201 489-1,3
Output Power: 10dbm (10mW)
Antenna: Monopole (¼ wave)
Rated voltage: AC 100-250V 50/60Hz
Rated current/Max Current: 0.3A/0.5A
Rated Load: 60W
Standby Current: 0.002A
Standby power: 0.25W
Environmental Working Conditions: -25 degree celsius to +85 degree celsius, Relative humidity:<95%
*monthly charges may apply.